• Fireclay from Medium & High heat duty conforming to I.S. and Steel Plant specification in all shapes and sizes with Alumina contents from 30 to 45%
  • High Grog & High Alumina refractories with Alumina contents from 45 to 85 % for various applications in steel, Cement, Glass, Sponge Iron, Aluminium, Non–Ferrous and Petrochemical Industries.
  • Silliminite Bricks and blocks for Glass plant.
  • Acid Resistant bricks for Chemical Industries, Petro –Refineries & Power generation plants.
  • Insulation bricks in Cold & Hot face qualities.
  • Various grades of mortars, ramming masses and castable refractories.
  • High quality Bottom Pouring Sets of various sizes of ingot making.

LAND:

  • A Massive big size corner plot i.e. 48366 square meter plain land, centrally located in the heart of city near to Railway Station and next to Govt. Polytechnic with 8" boring to ensure continuous and assured water supply.

SOME OF THE IMPORTANT MANUFACTURING FACILITIES AS EXISTING ARE GIVEN BELOW:

GRINDING:

A

  • Impact Mills. – 2 Nos. fitted with elevators 4 Nos.
  • Jaw Crushers. – Primary & Secondary 2 Nos.
  • Ring Roller Mill and continuous Rema Make Ball Mills with Air Separator for Fine grinding.
  • Pulverizer with elevator for Fine Clay grinding and storage.
  • Triple deck Vibrating screens with 1 mt dia permanent drum magnets 4 Nos
  • Avery makes batch weighing car – 2 Nos.

B

  • Disintegrator 2 Nos. with elevator, Rotary screen, U-Mixer, Pug mill and 0.50 -meter dia permanent drum magnet.
  • Batch type ball mills 4 Nos.

C

  • A separate grinding, mixing, manufacturing unit with Disintegrator, Rotary Screen, Muller, paddle and a Pug Mill with grinder, trollies for shifting of manufactured insulation bricks, mortar, castable with covered area of 450 square meter.

SHED & BUILDING:

  • One double story Administrative Block having 330 square meter area, surrounded by big green lawn.
  • 7035 square meters covered area to facilitate installation of Machines, Kiln, Green Manufacturing.
  • 603 square meter Residential Premises.

STORAGES:

  • The Grinded and Screened material of different size of grains and fines are being stored separately in 27 Nos. elevated hoppers having capacity to store 250 M.T.

MIXING:

  • High Intensity Counter Current Mixers – 3 Nos. with electric hoist 2 tones capacity 2 Nos
  • Paddle Mixer – 2 Nos.
  • Muller Mixer – 2 Nos.

PRESSES :

  • Friction Screw Presses – 400 tons –1 No. with electric hoist 2 tones capacity 2 Nos.
    150 tons – 9 Nos.
    80 tons – 1 No.
  • Hydraulic Jack Press - 200 tons – 1 No.
  • For special shapes hand moulding and Pneumatic ramming stations equipped with compressor for manufacturing intricate shapes & sizes. - 7 Stations.

DRIERS :

  • Tunnel Driers - 3 Nos. with 40 Nos. Steel Trolleys each.

KILNS :

  • Continuous Ring 86 Bench Kiln with Gas Producer Plant of 2.3 Mts. Dia up to 1500C.
  • Shuttle Kiln for high temperature firing up to 1650C
  • Tempering Kiln for curing Resin bonded products up to 300C.
  • Down draft 20' dia Kiln with 65' height chimney 4 Nos.
  • Brick loading and unloading Trollies – 12 Nos.
  • High temperature turner kiln 180' with ninety numbers trolly.

WORKSHOP :

  • Lathe Machine – 2 Nos.
  • Shaping Machine – 1 No.
  • Surface Grinder – 2 Nos.
  • Tool Grinder – 1 No.
  • Heat treatment Furnace – 1 No.
  • Automatic Sawing Machine – 1 No.
  • Drilling Machine – 2 Nos. etc.
  • Electric welding machine – 4 Nos.
  • Gas cutting set – 2 Nos.
  • Bricks size grinding and cutting machine with both side wheels.

MILL HOUSE :

  • Vibrating screen mounted on wheels – 3 Nos.
  • Wheel Barrow – 6 Nos.

POWER HOUSE :

  • Cummins make 110 KVA Diesel generators to ensure continuous power supply.

LABORATORY & QUALITY CONTROL :

  • The Plant has a well-equipped laboratory with all the requisite facilities for chemical, physical and Thermal testing. The company has an on going SPC programme for controlling the quality at all stages of manufacturing as well as finished products. Some of the equipments in our lab are given below:
  • Complete chemical analysis of raw material and finished products.
  • Digital Spectrophotometer.
  • Flame photometer.

EQUIPMENTS FOR PHYSICAL & THERMAL TESTING :

  • Refractoriness – PCE Value.
  • Refractoriness under load – RUL Value.
  • Permanent Liner change on reheating up to 1450 & 1650C.
  • Cold Crushing Strength.
  • Porosity, Bulk Density, Specific gravity etc.
  • Thermal conductivity.
  • Slag and Acid resistance tests.
  • HOT – MOR Tester.
  • Brick – cutting machine for sample making in required size and shape for testing.
  • Vibrating Sieve analysis machine.
  • Planetary Mixer Machine.
  • High Frequency Vibration Table.
  • Vi-Cut Needle.

The company is completing a new plant for the manufacture of Basic Refractory and various value-added products for Steel industry.

We at SVRL take all necessary study of customer's operation condition in detail and our products are accordingly recommended. The raw materials are procured from the best available resources of the Country. Moreover company also imports High-grade processed raw materials from all over the world.